Like many things, it all starts with a request from the kids...."Can we paint the house rainbow?"..."Can we get a 3D TV?"...."Can we get a puppy?"....NO, NO, and NO! So, when the request came for a magnetic chalkboard wall....I said YES!
Starting with the magnetic primer (it is called primer because it goes under whatever you want), but this IS the magnet part
Paint about 3 coats...I think I did 4? I just used all of it! Here's a tip, if you are going to trim it with moldings...you don't need to tape it off...the trim will cover it!
When that is good and dry, move onto the chalkboard paint. Because I am
obsessed concerned about how it will look (I did not want a black hole), I decided to use the tintable ones...
...and I chose periwinkle. Now, the metallic primer is a bit bumpy (all the metal fragments) so, it is a good idea to knock down the high spots before painting your chalkboard paint. I also did about 4 coats...I had it, might as well use it! While this was drying, I painted the rest of the room
Onto framing it with molding...I wanted a thick molding that would not only frame the chalkboard, but also hold chalk! I chose this profile...as you can see, when it is flat against the wall, the chalk should fit nicely
I always paint my moldings before I put them up. That way, you only need to do touch-ups for the nail holes. It is much easier than standing on a ladder and trying to paint. Like I showed you when I did the
faux crown molding, I marked all the studs with blue tape.
With
my usual tools, I applied the molding the same way as the
crown molding
Always check for level...also be aware if there are other straight (or not) parallel lines. Here you can see that the crown molding is close. Since nothing in a house is perfectly straight, you may want to split the difference...use your eye and step back from time to time!
Now this is the part that works great, but will bother many contractors. Caulk is the best glue you could ever use! Once it is dry, it is stronger than ALMOST anything. Since the sides of my chalkboard are not on studs, I put a bead of caulk on the back of the molding to make sure that it would hold tight to the wall
I must warn you, If you ever choose to remove this molding it won't come off WITHOUT SHEETROCK coming off too! That is why contractors hate this!....but it works GREAT!
That is the periwinkle chalkboard wall....however, you still need to "condition it". Say what?? I needed to google this. After waiting 3 days for the paint to cure,take a piece of chalk on its' side and rub it all over the new surface.
Use an eraser, and wipe it all down...NOW it is ready!
You can use magnets to hang EXTRAORDINARILY talented artwork...if I do say so myself...and you can color on the wall.
All the chalk fits nicely in the groove
I have just enough chalkboard paint left over for a few small crafty projects...any ideas?
